Tel: 01254 386776

roller door screens

Our roller fly screens for doors are suitable for almost any door opening whether it be sliding, hinged, single, double or french doors. The screens can be installed inside or out as they are totally rust free. Features of the screens; - spring tensioned mesh that resists sagging and tearing - polyester coated frames that resist chipping and scratching - decor grey mesh that doesn't block out the light - provides protection from UV light as well as insects that will help protect furnishings and carpets from fading - used extensively for keeping cats indoors - they can be used on single or double doors - retraction brakes are available to prevent the door from snapping back into the cassette - unique centre catch for double doors so one door can be left in place when opening - adjustable end caps to allow for 15mm tolerance when measuring
	The picture shows the double roller door with the mesh in place to stop flying insects entering the home. The doors will fit openings as follows; Single door 1500mm wide / 2900mm high £160.00 + vat Double door 3000mm wide / 2900 mm high £240.00 + vat All the screens come with fittings, screws and brackets as standard. A 10% discount can be made for doors supplied as kits. MORE PICTURES - CLICK HERE
Single door in the closed position. As you can see no light is blocked out and it doesn't spoil the outlook.
This picture shows the magnetic enclosure that the door fastens to to complete the seal.
One of the most common questions asked is how easy are the doors to install? This picture shows a sliding patio door and the roller screen is to be installed into the reveal. The same procedure is used for face fitting onto the frame with the use of face fitting brackets.
The reveal frame is shown.
The door has been fitted into the reveal and held in place by a screw into the frame.
The guides have been clipped onto the cassette end caps. The guides will run along the top and bottom of the door and have the brush pile to create the seal.
The magnetic closure is secured on the opposite frame to the cassette with 3 screws.
The door is now in place and in the closed position with the mesh covering the doorway. Total installation time 15 minutes and the use of 5 screws to hold the unit in place.